|
|
Zaklad
Sawmilling Equipment |
|
Zaklad
Metalowy Bandsaw 800 |
This band saw with mobile cutting
unit is used for lengthwise ripping of logs and balks. Rails on which
mobile cutting unit moves are equipped with log holding chucks.
Processing of the log is performed 0,1 m above ground level, which
makes it easy to load the log on the machine. Both vertical and
horizontal feeds have got a motor drive & strobes
|
|
Log
thickness :
without
rolling
|
max
850 mm
750
mm
|
Log
length :
standard
version
length
of track
|
11 m
13 m
|
Power installed : |
|
main motor drive |
10 kW/380V |
vertical drive ( up - down ) |
1,10 kW |
working horizontal drive |
0,55/1,05 kW |
Speed of feed - horizontal (front-back) |
|
1st gear : |
2,2 - 4,5 m/min |
2nd gear : |
4,5 - 9,0 m/min |
3rd gear : |
7,0 - 14,0 m/min |
4th gear : |
14,0 - 28,0 m/min |
Speed of feed - vertical (up-down) |
6 mm/s |
Overall size of Band |
|
length |
4,14 or 4,01 m |
width |
30 to 35 mm |
thickness |
0,8 to 1,0 mm |
pitch of teeth |
22 mm |
Overall size of cutting unit
: |
2,05 x 1,70 x height 1,35 m |
Total mass |
1650 kg |
cutting unit |
800 kg |
raceway |
6,5 m + 6,5 m - 580 kg |
raceway equipment |
270 kg |
Zaklad
Metalowy Bandsaw 1100 |
This band saw with mobile cutting
unit is used for lengthwise ripping of logs and balks. Rails on which
mobile cutting unit moves are equipped with log holding chucks.
Processing of the log is performed 0,1 m above ground level, which
makes it easy to load the log on the machine. Both vertical and
horizontal feeds have got a motor drive & strobes
|
|
Log
thickness :
without
rolling
|
max
1100 mm
1000
mm
|
Log
length :
standard
version
length
of track
|
11
m
13
m
|
Power installed : |
|
main motor drive |
10 kW/380V |
vertical drive ( up - down ) |
1,10 kW |
working horizontal drive |
0,55/1,05 kW |
Speed of feed -
horizontal (front-back) |
|
1st gear : |
2,2 - 4,5 m/min |
2nd gear : |
4,5 - 9,0 m/min |
3rd gear : |
7,0 - 14,0 m/min |
4th gear : |
14,0 - 28,0 m/min |
Speed of feed - vertical (up-down) |
6 mm/s |
Overall size of Band |
|
length |
4,90 m |
width |
40 ¸
42 mm |
thickness |
1,0 ¸
1,1 mm |
pitch of teeth |
22 mm |
Overall size of
cutting unit : |
2,40 x 1,75 x height 1,65 m |
Total mass |
1900 kg |
cutting unit |
900 kg |
raceway - 2 x 6,5 m |
700 kg |
raceway equipment |
300 kg |
Zaklad
Metalowy Frame saw PRP-58 |
This
machine saws logs of each length and diameter to 350
mm. Frame horizontal clearance of 580 mm, makes it possible to cut a
very thick log after one or two side cutting off in the band saw.
Several technical innovations is used in PRP-58 machine. Among others:
dynamic stress of blades, special openwork construction of saws, an
instrument for short log inserting and a set for quick feeding.
Construction of feeding trucks is changed completely with reference to
those of traditional one. They may be used for long and short logs
after minimal reinforcement.
|
PRP-58 machine functions as a traditional saw, multiple-saw, circular
saw for pallets. It is characterized by very small kerf.
|
Saw
frame horizontal clearance |
580 mm |
Vertical
clearance between rolls |
350 mm |
Saw
frame pitch |
300 mm |
Main
shaft rotational speed |
280 rotations
per minute |
Working
feed: |
0,2 - 2,5 m/min |
Blade
measurements: length; width; thickness |
780 x 80 x 1,5 mm |
Maximum
number of saws |
10 pieces |
Main
engine power |
11 kW/380 V |
Feed engine power |
0,75 kW/380 V |
Minimum
sawing thickness of plank |
14 mm |
Minimum
length of sawn log |
0,90 m |
Log
sawing height above the ground |
800 mm |
Height
of raceway above the ground |
600 mm |
Mechanical
roll pressure |
lever-balance.
|
Overall
dimensions |
1,20 x 1,60 x height 1,85 m |
Total
length with raceway |
10,00 m. |
Complete
equipment weight |
2950 kg |
Zaklad
Metalowy Board Edger OB II |
The rip saw is used for
edging boards at high speed. It has a function of automatic changing
the distance between saws.
It is equipped with a cut width controller,
which can be set on from a chosen distance from a control desk. That
gives the possibility of cutting each board at different width.
Changing or sharpening the saws is very easy. A laser version of this rip saw is also in production and electronic
of the width of edging.
|
|
Edging width: |
70 - 425 mm |
Edging thickness: |
max. 80 m |
Saw diameter: |
400 mm |
Speed of changing the
distance between saws: |
10 mm/s |
Power of saws: |
2 x 4,7 KW |
Total power installed: |
11,5 KW |
Rate of feed: |
7 m, 10 m, 13 m, 14 m, 20 m,
26 m/min |
Overall size without tables: |
1,45 m x 1,50 m x 1,50 m |
Total weight: |
1400 KG |
Zaklad
Metalowy Crosscut PP-400 |
The cutting - off machine is used
for transverse cutting of sawn timber. After blocking the feed and
resetting slide ways by 180o it can be also used for cutting
lengthwise. The transverse feed has a manual drive. The spindle is
supported on two bearings and gets drive from a motor by bands
|
|
Transverse feed: |
500 mm |
Max. thickness of cut: |
125 mm |
Saw diameter: |
400 mm |
Engine power: |
3,0 KW |
Spindle rotation: |
2 100 cycle/min |
Overall size: |
|
main table |
900 x 1000 mm |
feeding table (4 rolls) |
2350 x 670 mm |
receiving table (4 rolls) |
1300 x 670 mm |
height |
1100 mm |
Mass: |
440 kg |
-
- For
more information on Zaklad Bandsaw,
Framesaw &
- other
sharpening machines please click here
-
Z
A K Ł A D
M E T A L OW Y
Stefan Drozdowski
|
For
more information please do not hesitate to contact us.
Barry
Collier & Company (Pty) Ltd.
5
Rapid Street, Riverside Industrial Park, Nelspruit, South
Africa
PO
Box 2063 Nelspruit, 1200, Mpumalanga, South Africa
Tel:
+27 13 75 24349
Fax:
+27 13 75 33468
Cellular:
083 626 0030 / 083 626 2008
|
|
|